DC Power Line Protection
The Direct Current Series offers quality protection from noise and transients found in DC power lines. Each suppressor in this series will track the input voltage and suppress any transient lasting 100 microseconds or less. This series is designed for convenient mounting inside the user's equipment.
The Direct Current Series attenuates spikes and fills notches. The units in this series are not load sensitive. Plus, they have nanosecond response times and two stage protection.
If LEDs are required for your application, then the AC Series Units can be used in place of the DC Series.
|
Model |
VDC |
Rating (Amps) |
Weight |
Case Size |
|
AI-025-DC |
150 |
0.25 |
0.25 oz. |
1.3" x 1.0" x 0.8" |
|
AI-050-DC |
150 |
0.50 |
4 oz. |
2.5" x 1.8" x 0.8" |
|
AI-100-DC |
150 |
1.00 |
4 oz. |
2.5" x 1.8" x 0.8" |
|
AI-101-DC |
150 |
1.00 |
0.50 lb. |
4.0" x 2.0" x 1.5" |
|
AI-102-DC |
150 |
2.50 |
1 lb. |
5.4" x 2.9" x 1.8" |
|
AI-105-DC |
150 |
5.00 |
1 lb. |
5.4" x 2.9" x 1.8" |
|
AI-107-DC |
150 |
7.50 |
2 lbs. |
6.4" x 4.3" x 1.5" |
|
AI-107-DC-MF |
150 |
7.50 |
2 lbs. |
5.8" x 4.7" x 2.4" |
|
AI-115-DC |
150 |
15.00 |
4 lbs. |
8.3" x 5.3" x 2.6" |
|
AI-115-DC-MF |
150 |
15.00 |
4 lbs. |
7.3" x 4.7" x 2.4" |
Shown below are the options available to these units.
Visit the Options Page to obtain more information.